DIY Soldering Station

Edit schematic and convert it into PCB here:

Support me for more videos:
Previous video:
Facebook:
Twitter:
More project information (code, pictures,....) on Instructables: /

Thanks to EasyEDA for sponsoring this video.
Check out their free circuit design tool here:
Great cheap PCB Fab House here:

Parts list (Incomplete, see Instructables for more):
Amazon.com:
1x Toroidal Transformer: -
2x 2W10 Full Bridge Rectifier:
1x BTB26 Triac:
1x MOC3020 Optocoupler:
1x 4N25 Optocoupler:
1x Arduino Pro Mini:
1x SPI OLED LCD:
1x MAX6675:
2x 1000µF Capacitor:
3x 100Ω, 1x 330Ω, 1x 2kΩ Resistor:
1x 50kΩ Potentiometer:
Ebay:
1x Toroidal Transformer:
2x 2W10 Full Bridge Rectifier:
1x BTB26 Triac:
1x MOC3020 Optocoupler:
1x 4N25 Optocoupler:
1x Arduino Pro Mini:
1x SPI OLED LCD:
1x MAX6675:
2x 1000µF Capacitor:
3x 100Ω, 1x 330Ω, 1x 2kΩ Resistor:
1x 50kΩ Potentiometer:

In this project I will show you how to create an Arduino based soldering station for a standard JBC soldering iron. During the build I will talk about thermocouples, AC power control and zero point detection. Let's get started!

Music:
2011 Lookalike by Bartlebeats
Ecstatic Wave, Jens Kiilstofte


You want to support my videos?
You can browse and buy tools&materials from my Amazon Store. This way I get a small commission:
Amazon.de:
Amazon.com:
Amazon.co.uk:

Or you feel super generous and want to use this Amazon link as your Amazon home page. And do not worry, your purchases are all anonym and the prices are all the same:
Amazon.de:
Amazon.com: